Inside The Print Shop Preferences you
can set your default unit of
measurement, add your Facebook® e-mail
address, give feedback to make
The Print Shop better, view the version
number of The Print Shop you are using, collect information about what you're
doing in The Print Shop for yourself or for our support staff.
On this tab you can select the default
unit of measurement. Your choices are between Inches and
Millimeters. Selecting one or the other will affect a variety
of tools across the program including the rulers to display the new
unit of measurement.
You can also set your Facebook e-mail
address by typing it into this tab.
Customer Feedback Tab
This tab is used to collect how often
you use The Print Shop and which parts of The Print Shop you use
the most. Encore will use this information to determine which
parts of The Print Shop should be expanded when we create our next
If you do not wish to participate go
to this tab and uncheck the box for "Yes, I would like to Provide
This tab is for logging
purposes. By setting logging to a higher level you will be
able to send a report to the Encore Support Teams which will tell
them what you were working on or trying to do when something went
wrong. This will allow our support representatives to try to
do what you did here and see if they can figure out what went
If you want logging to be turned on,
or are asked by a support representative to turn it on, go to this
tab and set logging to level 6 - Verbose.
This tab gives you the version
information on The Print Shop 3.0. As Encore releases
patches, the version number will change from 188.8.131.52 which is what
it is at the time of writing this manual to something higher such
Back to Getting Help...